BAF Trailer manufactures high quality Dolly trailer from Turkey to World. This trailer is suitable for bridge beam transport. According to demand we can change the technical specificataions. BAF Trailer can produce dolly trailer 500 pcs in a year.
Lowbed rack is welded by submerged welding machine from 20 -25 mm x 200 mm ST52.3 Quality steel bottom and top flat steel and 10 mm ST52.3 hub plate. It has ”I” section and also includes 4 pcs.
Rack is supported with 160 NPI axle beams that crosses rack.
It has been produced in welding constructions with gas metal arc welding as “I” crossing from high resistant steel considering overloads proper to capacity and intended usage.
Total Length: 13000 – 16000 mm varies according to demand. Lowbed can be extendable
Total Width: 2550 mm – 3300 mm varies according to demand
Manufactured with air or hydraulic piston from NPU with 160
2-3-4 pcs Axles, each one is with 9-12-16 tons capacity according to the trailer
drum or disc brakes, hub centric, with 10 wheel nuts, and automatic slack
adjuster.
20+1 tires are used with different dimensions. Dimension that we use are;
315/80 R 22.5
12 R 22.5
11.00 R 20
10.00 R 2020+1 tires are used with different dimensions. Dimension that we use are;
315/80 R 22.5
12 R 22.5
11.00 R 20
10.00 R 20
The WABCO or Haldex brand ABS or EBS brake system which is designed according to the European Standards is used. It consists of automatic brake ratchets, brake valves and brake bellows of 30.
It consists of automatic height adjusting system, Parabolic Z leaf springs, Suspension bellows, shock absorbers restricting extensive shaft movements and vibrations.
Mechanical leaf spring suspension system.
24 V illumination systems in conformity with the international standards, lamp with 7 functions, and electric socket with 7 pins are used. There are traffic warning panels on the vehicles.
Consists of double cycle telescopic legs each of which has a capacity of 24 tons.
King pin compliant with SEA/DIN norms and manufactured from steel (42 Cr Mo 4) which is highly resistant to being cut, stretched and broken off is of flange type and can be disassembled and assembled back.
The surfaces are cleaned under high pressure with water and bonder chemical liquid. Then it is dyed with one coat of epoxy die, and a last coat of acrylic die. It is very durable against chemical effectiveness. As desired, colours can be chosen from the RAL codes.
Water Retainer Mat, Spare tyre carrier, Wheel leaning mounting, Fire extinguisher preserving cabinet.
