BAF Trailer©
All Rights Reserved 2016 - 2020

Side Tipper Trailer

Enhanced Features


BAF Trailer can manufacture high quality Side Tipper Trailer for its Worldwide customer. . In our tipper we use Turkish or EU parts which is well know from all trailer users. You can load any kind construction materials on this semi trailer. According to your demand all technical specifications canbe changeable. BAF Trailer can produce tipper in different capacities.

Side Tipper Trailer

Please ask for drawing of the trailer to our e-mail address:


The chassis designed in accordance with the international transportation standards also available and prepared as having “I” section centre members are welded by submerged welding machine. They are welded between 120/12 mm bottom or top flat steel and 5 mm hub plate with high resistance to allow to obtain the highest efficiency under all road and weather conditions.
Flat base on the front in 7500 mm – 9500 mm sizes, also it is 2420 mm width inside and 2550 mm width outside.
It has 3 – 4 caps on the sides.
Back cap has suspension beam and it is 2 opening type.
950 mm cap has double addtion in 350 mm x 350 mm sizes.


Special design with lock system to allow dump right and left.
Base 5/4 chequred plate
Front Panel Front panel reinforced with NPU not to allow the load carried to damage the front panel.
Crosses and Other All sheets are ST52.3 steel quality
Hydraulic:  Pump 45-85 liters double turn gear pump
Hoses R2 steel hoses durable to 280 bars working pressure.
Dumper Lift High-strength steel cylinders of 3 telescopic with minimum 300 lifting angle and made of cold drawn tubes durable for power in this angle.
Mechanical leaf spring suspension system.


2-3 pcs Axles, each one is with 9-12-16 tons capacity according to the trailer drum or disc brakes, hub centric, with 10 wheel nuts, and automatic slack adjuster.


Tires 6 + 1 pieces of 385/65 R 22.5 sizes. Wheel Rims 6 + 1 piece 11.75V22.5 sizes or double wheel optional to the customer demand.


BPW, SAF, Gigant Axle drum or disc axle can be preffered.
Chassis and side walls group manufactured from imported metal sheet (Hardox or Domex).
Aluminum Rims.
Tire mark according to request.


24 V illumination systems in conformity with the international standards, lamp with 7 functions, and electric socket with 7 pins are used. There are traffic warning panels on the vehicles.


Consists of double cycle telescopic legs each of which has a capacity of 24 tons.


King pin compliant with SEA/DIN norms and manufactured from steel (42 Cr Mo 4) which is highly resistant to being cut, stretched and broken off is of flange type and can be disassembled and assembled back.


Tires 6 + 1 pieces of 385/65 R 22.5 sizes. Wheel Rims 6 + 1 piece 11.75V22.5 sizes or double wheel optional to the customer demand.


Water Retainer Mat, Spare tyre carrier, Wheel leaning mounting, Fire extinguisher preserving cabinet.